cinderwing3d

Cat Dragon (Updated with Wingless version!) [ARCHIVED]

Published: March 26th 2025, 7:00:10 pm

This was a MARCH 2025 Design and has been Archived! 
If you were subscribed in March you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in MARCH 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MARCH Models will be in the MARCH 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections

BIG UPDATE! WINGLESS VERSION NOW ADDED! Y'all wanted it, I made it happen! Jazzy was also able to add a 2 color paint job for it as well!

EDIT: 2 color 3mf has been fixed, PLEASE REDOWNLOAD IT.
Wingless version is in the works due to massive demand. Thank you!

Hi Cinders!

It's been a great month and I've had a ton of fun designing and releasing a bunch of models to you all! I truly hope you've enjoyed what I've sent out so far!

I set myself a pretty ambitious goal of giving you all 9 models this month, and I was feeling super hopeful about hitting it. But March has been packed with celebrations—my birthday, Richie’s birthday, and my daughter’s birthday party all landed this month- and I ended up falling a bit behind. On top of that we ran into some testing issues with our last 2 designs that will need a few more days then we have to fix.

That said, I came really close! There will still be one design release after this one but these last 2 will come out in the beginning of April! I know you all will love them! Thank you for all your patience and understanding. :)

CAT DRAGON:

I am really excited to release to you all the Cat Dragon! I had a vision of the cat dragon's head sitting up in a cute cat pose and worked hard to make this happen! It prints with the neck and head down, and clicks and locks up after printing. The wings also print aligned and fan out after printing. I have designed the wings slightly different then previous wings. You should be able to hook the wings flaps past each other to hold the wing in a fan out position (please see pictures). It's also decorated with fur, scales, and dragon horns! Hope you all enjoy this design! Thank you!

I have also included some .3MF Color files!
The 2 Color version painted by me!
The 4 Colors Tabby painted by Toad
(I slightly modified the Tabby paint job for the release photos!)

-Tracy

----------------------------------------------------

FILAMENT and Tools:

https://www.amazon.com/shop/cinderwing3d

single color: Locyfens Shiny 3 color change (blue purple)

2 Color Orange: Sunlu White, Flashforge Yellow & Pink gradient

2 Color Rainbow: Cmacaiv3D Kingfisher Rainbow blue purple yellow green, Amolen glow rainbow

-----------------------------------------

All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!

Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!

Print Settings:  .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.

Please join our discord chat below for more help and discussions.

------------------------------------------------------

7 Design Drops - March 2025 Models:  HERE

• Baby Fae Wolf Dragons - EXCLUSIVE - RELEASED

  • Closed Pattern Wings Version

  • Open Pattern Wings Version

  • (4) .3MF Color Files

• TINY Flying Serpent - RELEASED

  • (1) .3MF Color File

• Crystal Snake - RELEASED

  • (2) .3MF Color Files

• Egg Spider - RLEASED

  • (2) .3MF Color Files (Easter and Robin)

• Tiny Bunny Dragon - RELEASED

  • (1) .3MF Color File

• Cat Dragon - RELEASED

  • (2) .3MF Color Files

• Secret Design

-------------------------------------------------------

PLEASE READ

Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.

This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.

NO sharing, re-selling, or distributing this digital file or modifications of it in any way.  Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.

---> Please see WELCOME POST for questions, all exclusive releases, and links:  https://www.patreon.com/posts/welcome-to-info-71819754

All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections

Link to the PUBLIC MODELS and Exclusives Full Index List:

Facebook Gallery

Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d

For any help requests or issues please go through this email: Email ([email protected]) OR through a Discord ticket!

Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!