cinderwing3d
Tiny Bunny Dragon [ARCHIVED]
Published: March 20th 2025, 7:00:13 pm
This was a MARCH 2025 Design and has been Archived!
If you were subscribed in March you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in MARCH 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MARCH Models will be in the MARCH 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections
This was a MARCH 2025 Design and has been Archived!
If you were subscribed in March you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in MARCH 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MARCH Models will be in the MARCH 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections
Hi Cinders!
Bringing you all the Tiny Bunny Dragon! So many of you have been asking for more Tiny Dragons for the Tiny Dragon/ Tiny Wyvern Collection and I thought this would be a cute little one for Easter coming up. It is decorated with eggs, spring themed feathers, and an adorable bunny face! Hope you all like it!
TWO .3MFs brought to you with the painting help of Tester Eli and Tester Julie! Thank you both!
As most Cinderwing3D "Tiny" Designs, the original size is usually pretty big. The "TINY" comes in where they have been designed with bigger links to be STRONGER and capable of printing at smaller, ACTUAL TINY sizes. :) This design has been tested between 100%-60%.
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
single color: Sunlu Silk Orange Pink Yellow Green
3 Color: Sunlu White, iBoss Transparent Rose Red Orange, Lovoon gradient matte rainbow
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
9 Design Drops - March 2025 Models: HERE
Baby Fae Wolf Dragons - EXCLUSIVE - RELEASED
Closed Pattern Wings Version
Open Pattern Wings Version
(4) .3MF Color Files
TINY Flying Serpent - RELEASED
(1) .3MF Color File
Crystal Snake - RELEASED
(2) .3MF Color Files
Egg Spider - RLEASED
(2) .3MF Color Files (Easter and Robin)
Tiny Bunny Dragon - RELEASED
(1) .3MF Color File
Secret Design
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email ([email protected]) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!