cinderwing3d

Rose & Crystal FIDGET SPINNERS!

Published: January 10th 2025, 9:41:42 pm

This was a JANUARY 2025 Design and has been Archived! 
If you were subscribed in January you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in FEBURARY 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the JANUARY Models will be in the FEBURARY 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections

Hi Cinders!

Bringing you all these two themed Fidget Spinners: Crystal and Rose! 

I've been wanted to make spinners for a while now! There was a lot of trial, error, and testing to get to the point where I was actually happy with one!

Most fidget spinners require assembly, and I really didn't want that for this design; so I set out to make the most effective print-in-place version I could. There were many prior renditions/designs that just didn't have the right free spin. Finally, I got the design down to where it spins the best it possibly can being entirely print-in-place! - And I'm so happy with it!

Videos of them spinning in this post!

-Tracy

----------------------------------------------------

FILAMENT and Tools:

https://www.amazon.com/shop/cinderwing3d

TBA

-----------------------------------------

All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!

Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!

Print Settings:  .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.

Please join our discord chat below for more help and discussions.

------------------------------------------------------

January 2025 Models:  HERE

• Baby Unicorn Dragon - RELEASED - EXCLUSIVE

• Baby Alicorn Dragons - RELEASED

  • Wings

  • Wingless

• Tiny Snails - RELEASED

  • Rose Snail

  • Strawberry Snail

• Tiny Rose Dragon&Wyvern - RELEASED - EXCLUSIVE

  • Tiny Rose Dragon

  • Tiny Rose Wyvern

  • Tiny Rose Dragon Keychain

  • Tiny Rose Wyvern Keychain

• Rose & Crystal Fidget Spinners - RELEASED

  • Rose Fidget Spinner

  • Crystal Fidget Spinner

• Secret Design

• Secret Design

• Secret Design

• Secret Design

• Secret Design

• Secret Design

• Secret Design

• Secret Design

-------------------------------------------------------

PLEASE READ

Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way.  Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.

Please see WELCOME POST for questions, all exclusive releases, and links:  https://www.patreon.com/posts/welcome-to-info-71819754

All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections

Link to the PUBLIC MODELS and Exclusives Full Index List:

Facebook Gallery

Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d

For any help requests or issues please go through this email: Email ([email protected]) OR through a Discord ticket!

Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!