chillichump

3D files for Homemade Hydroponics system

Published: July 3rd 2020, 4:00:01 pm

PreviousNext

See attached the STL files that accompany this video: https://youtu.be/mB6CJHqPdqQ

I have designed these parts so that they can be printed without supports. I also didn't use any infill, but you can if you like.

I use 9mm ID silicone hose with this. But most 8.5mm to 9mm pipe will do the job!

**Edit 7 July 2020**

I have added another STL model in case you are having problems printing the "insert". This one has legs that you can snip off. They help with the printing without having to do any support. 


PreviousNext