anvil_davidstar

Anvil 105: Over/Under Stock Repair

Published: October 21st 2021, 1:27:14 pm

Very high round count competition shotgun needed some stock work. Being good at fixing problems is not necessarily a good thing if you don't fix the root cause of the failure. In this case, the bedding finally set back enough to stress the head end wood, and it blew off a spall. Cracks are also beginning in several places, all caused by the same bedding failure. 

This was a target of opportunity video, as the unit was needed a few days later for a tournament. As such, the glass bedding of the action was not captured here as precluded by timing constraints. 

                                    mark and Bruno